BG-L/S-M/VSA-BB Sheet Metal Deburring Machine
The BB series sheet metal deburring machine is a flat-bed sanding and deburring solution for laser-cut, punched and sheared metal parts. It focuses on burr removal and surface preparation on stainless steel, carbon steel, aluminum and galvanized sheet parts.
Core Product Value
A compact entry configuration for factories that mainly need abrasive-belt burr removal and surface sanding after cutting.
Main Applications
- Laser-cut sheet metal burr removal
- Flat sheet surface sanding
- Cabinet, enclosure and bracket production
- Pre-treatment before bending, welding or coating
Main Technical Parameters
| Model | BG-L/S-M/VSA-BB |
|---|---|
| Workbench width | 630 / 1000 mm |
| Machining thickness | 0.5-110 mm |
| Feeding speed | 1-8 m/min, frequency control |
| Belt speed | 2.2-11 m/s, frequency control |
| Brush speed | Not equipped in standard BB configuration |
| Rated voltage | AC 380 V / 50 Hz |
| Power, magnetic table | 12.5 / 17.6 kW |
| Power, vacuum table | 18 / 25 kW |
| Air pressure | 0.6-0.8 MPa |
| Weight | 1400 / 1800 kg |
| Overall dimensions | 1700 x 1100 x 2400 mm / 1700 x 1480 x 2400 mm |
Note: Parameters are catalog references. Final configuration should be confirmed according to material, part size, process target and quotation documents.
Application Scenario Q&A
What type of burr is this model for?
It is suitable for flat sheet burr removal and surface sanding when edge-rounding demand is moderate.
Can it process laser-cut parts?
Yes, it is intended for post-cutting deburring and sanding of flat metal parts.
What should be checked before purchase?
Check burr size, material, part width, minimum part size and table holding method.
RFQ Information to Prepare
- Material and grade
- Thickness range
- Maximum and minimum workpiece size
- Target finish or process requirement
- Daily production target
- Factory voltage and automation requirement
